Tu Es Belle CE Academy logo Tu Es Belle CE Academy

← Laser Hair Removal CE · Texas 8-Hour Renewal

Lesson 5 of 8 · 50 min

Burns & Eye Protection

Meets TDLR's continuing education requirements under 16 TAC §118.25
Starting…

In this lesson

  • How burns happen in laser work — five causes, and every one of them has a name from an earlier lesson
  • Reading a burn — degrees, appearance, and why redness hides on deep skin
  • The first five minutes — the response sequence, and what never goes on a fresh burn
  • When you refer out — the thresholds that send a client to a physician the same day
  • The eye — the one organ built to focus light, and why our wavelengths reach the retina
  • Eyewear, in full — optical density, matching the wavelength, shields for the client, and care that retires a pair

Learning objectives

By the end of this lesson, you will be able to:

  • Name the five routes to an LHR burn and trace each one back to the physics, device, or typing failure behind it
  • Recognize a burn's depth from its appearance — including on deep skin, where redness is an unreliable sign
  • Run the first-five-minutes response in order: stop, cool, cover, assess, notify, document
  • State what never goes on a fresh burn, and why
  • Apply the referral thresholds that send a client to a physician or urgent care the same day
  • Explain optical density, match eyewear to a wavelength, and tell the difference between client eye shields and corneal shields — and who may place each

---

Welcome

Lesson 4 ran the appointment from the door to the aftercare sheet — every step in its order, every decision made the careful way. This lesson is about the two injuries that whole protocol exists to prevent.

A laser burn and a laser eye injury are the twin harms of this field. They share three traits: both happen in seconds, both are usually preventable, and the outcome of both is decided by what the practitioner does in the minutes right after — or fails to do in the minutes right before. So this lesson has two halves that mirror each other. For burns, we go deep on recognition and the immediate response; the days of aftercare that follow belong to Lesson 6. For eyes, we go deep on protection — because Lesson 4 could only give eyewear its one paragraph, and the eye deserves the full treatment.

If Lesson 1 was the physics and Lesson 4 was the choreography, this lesson is the reason for both.

Let's start where burns start.

---

How burns happen — five causes, all familiar

A burn is not bad luck. In laser work, a burn is the last step of a chain that an earlier lesson already named. Learn the chain and you can break it at any link.

Cause 1 — Fluence beyond the surface's budget. Lesson 1, Section 4: the epidermis absorbs part of every pulse, and it can only shed so much heat. Fluence chosen for the follicle the practitioner wished for — or copied from another client's chart — spends the surface's budget and keeps going. This is the most common cause of LHR burns.

Cause 2 — The wrong wavelength for the skin in front of you. Lesson 1, Section 7 and Lesson 3: alexandrite energy on type V skin, or any aggressive wavelength on freshly tanned skin, means the epidermis competes for the light too well. The device was not defective. The match was.

Cause 3 — Stacked heat. Lesson 1, Section 5: pulses delivered to the same spot in quick succession add their heat faster than tissue can shed it. A gliding handpiece that stalls, a second pass "to be thorough," an overlap heavier than the protocol allows — the skin experiences one long, hot pulse, whatever the screen said about each one.

Cause 4 — A fouled or damaged window. Lesson 2, Section 4: carbon buildup and scratches absorb and scatter the beam. The energy that leaves the handpiece is no longer the energy the screen describes — it concentrates in hot spots, and the hot spot is where the burn appears. Burns in odd, tight patterns after a device "was working fine yesterday" often trace here.

Cause 5 — Cooling that failed, was skipped, or never touched the skin. Lesson 1, Section 8 and Lesson 2, Section 5: cooling is part of the dose calculation. A cryogen canister running empty, a contact tip lifted at the edge of each placement, a cooling check waved through at start-up — the fluence was chosen assuming protection that was not there.

Read the five again. Not one of them is "the client moved" as a first cause, and not one requires a broken device. Every LHR burn you will ever review began as a physics decision, a device habit, or a typing failure — which is why this course spent four lessons in front of it.

---

Reading a burn — depth, appearance, and the skin in front of you

Burns are described by depth — how far the injury goes into the skin — and depth drives everything: the response, the referral, and the recovery. Three depths cover what you will see in laser practice.

Superficial (first-degree)

  • The epidermis only. Red, warm, painful, no blister.
  • This is the depth of a hard sunburn, and ordinary perifollicular redness from a normal treatment can mimic it — the difference is degree and pattern: a burn's redness follows the handpiece placements, hurts more than the client expected, and does not settle as normal redness does.
  • On deep skin tones, the redness may not be visible at all. Read the other signs: warmth, swelling, pain, and a shift in the skin's color — deepening, or an ashen, gray cast.

Partial-thickness (second-degree)

  • Into the dermis. Blisters — the signature sign — over skin that looks moist, mottled red or pink, and is very painful.
  • This is the classic laser burn when it declares: blistered rectangles or stripes exactly where the pulses landed.
  • On deep skin, blistering and moisture still show clearly; color cues shift from red toward darkened, shiny, or patchy.

Deep partial and full-thickness (third-degree)

  • Down through the dermis, possibly deeper. The surface looks pale, white, waxy, charred, or leathery — and it may hurt less, because the nerves themselves are damaged.
  • The quiet burn is the dangerous one. A client who says "actually, that spot doesn't feel like much" about skin that has turned pale or waxy is describing a deeper injury, not a reassuring one.

Burns declare over time

A burn is not finished when the pulse ends. Heat injury evolves over hours: skin that looked merely red at the end of the appointment can blister by evening, and a borderline area can declare itself the next morning. Two consequences follow. First, your assessment at the chair is a first reading, not a final one — the client leaves with instructions for what to watch for, and Lesson 6 covers that aftercare and the 48-hour red flags in full. Second, document what you saw and when, because the record of a developing injury is written in sequence.

2. Reading a burn — depth, appearance, and the skin in front of you

Three panels side by side on ivory — Superficial (an even red patch; beside it, the same injury on deep skin shown as darkened, warmed skin) · Partial-thickness (a blistered, moist stripe in the handpiece's rectangle) · Deep (a pale, waxy, leathery patch). Each panel captioned with the two or three signs to read, light skin and deep skin side by side. The narration reads each panel in words.

---

The first five minutes — the response sequence

When you recognize a burn — in the room, at the chair — the response is a sequence, and the order matters. This is clinical first aid, the standard of care you will be judged against; learn it as one motion.

  1. Stop. Device to standby, handpiece down. The area does not get "one more pulse to finish the row." Treatment on that area is over for the day.
  2. Cool. Cool the skin — cool running water over the area, or a cool, wet compress refreshed as it warms — for 10 to 20 minutes. Cooling started early and kept up is the single act that most limits how deep the injury goes. It also eases pain, which buys you a calmer assessment.
  3. Remove what constricts. Jewelry, watches, tight clothing near the area come off before swelling makes them a tourniquet. Anything stuck to the burn stays — never peel material off injured skin.
  4. Cover. Loosely lay a sterile, non-stick dressing over the cooled burn — or clean plastic wrap laid on, not wound tight. Nothing adhesive touches the burn itself. The cover keeps air and contamination off exposed nerve endings; it is protection, not treatment.
  5. Assess. Now read what you have: the depth signs from Section 2, the size of the area, the location, the client's pain and their account of how it feels. Size has a ready ruler: the client's own palm, fingers included, is roughly 1% of their body surface — burn first aid uses it to judge when an injury is more than small.
  6. Notify. Follow your facility's protocol — the responsible Professional and the facility's consulting-physician structure are informed the same day, not at the next chart review. If the referral thresholds in Section 5 are met, the client is directed to care first and the notifications follow the same day.
  7. Document. While it is fresh: what happened, what you saw, what you did, in what order. Section 6 gives the record its shape.

---

What never goes on a fresh burn

The first five minutes have a negative space — the things that must not happen. Every item below is something well-meaning people reach for; part of your professional value is that you don't.

✦No ice, no ice waterCold that hard injures tissue that is already injured. Ice and ice water clamp down the blood vessels in skin that is already injured, starving it at the moment it most needs flow.
✦No ointments, butters, or oilsNo creams, ointments, butter, oils, or home remedies in the first response. They seal heat and contamination against damaged skin, and they obscure the assessment.
✦No breaking blistersAn intact blister is a sterile dressing the body built itself. Opening it converts a protected injury into an open wound with an infection risk.
✦No adhesive on the burnAdhesives tear fragile, injured skin on removal. Non-stick and loose, or nothing beyond clean plastic wrap laid on.
✦No “let's finish the area” — not todayNo treating through, and no finishing the area. Not at lower settings, not “just the symmetric other side.” The appointment's treatment portion ended at the stop.
  • No ice or ice water. Section 3's key fact: cold that hard injures tissue that is already injured.
  • No creams, ointments, butter, oils, or home remedies in the first response. They seal heat and contamination against damaged skin, they obscure the assessment, and anything on the surface will have to be cleaned off by whoever treats next. What a physician later prescribes is their decision, made on a clean field.
  • No breaking blisters. An intact blister is a sterile dressing the body built itself. Opening it converts a protected injury into an open wound with an infection risk.
  • No adhesive dressing on the burn. Adhesives tear fragile, injured skin on removal. Non-stick and loose, or nothing beyond clean plastic wrap laid on.
  • No treating through, and no finishing the area. Not at lower settings, not "just the symmetric other side." The appointment's treatment portion ended at the stop.
  • No promises about the outcome. Do not tell the client "it will fade" or "there won't be a mark." Pigment change and scarring are real possibilities after a partial-thickness burn, and they cannot be assessed today. The honest sentence is: "This is a burn. Here is what we are doing now, here is what to watch for, and here is who will see you next."

---

When you refer out — the same-day thresholds

Most superficial LHR burns are managed with first aid, physician notification, and close follow-up. Some burns do not belong to your follow-up at all. Refer the client to urgent care or a physician the same day — before they leave, with the destination named — when any of these is true:

  • Blistering that is more than a spot or two — partial-thickness injury over a worked area
  • Size — the burn covers more than roughly the client's own palm, or several handpiece placements in a field
  • Depth signs — pale, white, waxy, charred, or leathery skin, or an area that hurts oddly little (Section 2's quiet burn)
  • Location — face, hands, feet, over a joint, or the genital area; these heal with higher stakes and less margin
  • The client — a child, or a client whose health is fragile (poorly controlled diabetes, immune suppression, circulation problems): their healing margin is thinner, so the referral threshold drops
  • Your honest doubt — the last threshold, and a real one: if you are asking yourself whether it needs a physician, it needs a physician

After the referral comes infection watch, which the client carries home in writing (Lesson 6 writes the full sheet): spreading redness, pain that increases after the second day, pus, red streaks, or fever mean same-day medical care, not a wait-and-see weekend.

Referral is not an admission of failure and must never be framed to the client as one. It is the profession working as designed: you recognized, you responded, you handed the injury to the level of care it needs.

---

Writing it down — the incident record

Lesson 4 taught charting as the record that protects you. An incident record is that same discipline under worse lighting — and it is written the same day, from memory fresh, in plain factual language.

The record of a burn holds:

  • The setup — client, date, area, device and handpiece, the full settings as treated, cooling in use
  • The event — what was observed, at what point in the treatment, and the client's words for what they felt
  • The response — the stop, how long the area was cooled and by what method, the cover applied, the assessment (depth signs, size against the palm ruler, location)
  • The notifications — who was informed and when: the responsible Professional, the consulting-physician structure, and the referral destination if the client was sent out
  • The handoff — the written instructions the client left with, and the follow-up arranged

Two writing rules carry over from Lesson 4 and matter more here. Facts, not blame: the chart records settings and observations, not conclusions about whose fault anything was. No silent edits: if something must be added later, it is added as a dated note — the original entry is never rewritten. Photographs, when taken, follow the consent and documentation practice from Lesson 4: they show the injury's honest state and they belong to the record.

---

Pause and practice: the gray-white patch

Second session, lower legs. Your client is Fitzpatrick type IV, coarse black hair, on a diode platform — the same pairing as Lesson 1's practice case, one visit later. The first leg went by the book: perifollicular edema at the endpoints, client comfortable. You are three placements into the second leg when she says, "That one felt different — sharp," and on the skin you see a placement-sized patch turning pale gray-white.

Decision 1 — The next ten seconds. What do you do? Stop. Device to standby, handpiece down, and your eyes and hands go to the skin — not to the settings screen and not to one more test of the area. A pale gray-white patch with sharp pain is the epidermis announcing injury in real time (Lesson 3 named it a stop sign). The treatment on this leg is over for today, whatever the clock says about the appointment.

Decision 2 — Cooling. The freezer in the break room has ice packs. The treatment-room sink has a tap. Which one, and how long? The tap. Cool running water over the patch for a full 10 to 20 minutes — cool, never ice, because ice starves injured skin and adds a cold injury to a thermal one. While the water runs, you learn what you have: the patch is one placement in size, the surrounding placements look normal, the pain is easing under the water. Cover it loosely with a sterile non-stick dressing when the cooling is done.

Decision 3 — She sits up and says: "It looks fine now — can't you just finish the other leg? I drove an hour." What happens next? The other leg is not treated today either — not as punishment, but because you do not yet know why this happened, and firing again before the cause is found risks repeating it on fresh skin. What happens instead: the facility's protocol notifications go out the same day, the incident record is written while it is fresh, and she leaves with the red-flag instructions in writing and a follow-up call arranged — and, because a blistering or deepening patch is possible as this declares itself, clear direction on where to go if it worsens. One more thing belongs in the record and the review that follows it: before this device treats anyone again, the window gets inspected — Cause 4 does not announce itself twice.

---

The eye — an organ built to focus light

Turn now to the second harm, and start with the uncomfortable fact: the eye is the only organ in the body designed to gather light and concentrate it. That design is what makes it vulnerable in a way skin never is.

Skin meets a pulse across the spot it lands on. The eye meets the same pulse through a lens: light entering the pupil is focused to a pinpoint on the retina, concentrating the energy of the whole pupil onto a spot a fraction of a millimeter wide. A beam that would warm skin can, arriving through that optics, injure the retina in a single exposure — and the retina does not heal like skin.

Where the injury lands depends on wavelength:

  • Visible and near-infrared light — our entire optical window, 755 to 1,064 nm — passes through the cornea and lens and reaches the retina. Alexandrite, diode, and Nd:YAG injuries are retinal injuries.
  • Much longer infrared wavelengths are absorbed at the front of the eye — cornea and lens. Those are other devices' hazards, not LHR's; name them only to know why our rules are written the way they are: every wavelength this course touches is a retinal wavelength.

The invisibility problem. Diode and Nd:YAG beams are invisible; alexandrite's deep red is faint. The eye's defenses are built for visible brightness — the blink, the flinch, the aversion to looking at glare. An invisible beam gives no warning to defend against, and even a visible pulse is over in milliseconds, long before any blink. And a retinal injury may be painless at the moment it happens — the retina has no pain fibers of the kind skin has; a client or an operator can take a retinal exposure and learn of it from a blind spot, not from pain.

That is the whole argument for this lesson's second half: because the beam cannot be seen, because the eye concentrates it, and because the injury is silent and permanent, eye protection in LHR is not a precaution layered on the treatment. It is a condition of the treatment existing at all.

---

Eyewear — optical density, and matching the wavelength

Eyewear protects by absorbing the beam before it reaches the eye — but only the beam it was built for. Two facts printed on every legitimate pair govern its use: the wavelength range it covers, and its optical density (OD) across that range.

Optical density is a measure of blocking power, and it is logarithmic — each step multiplies the protection by ten:

RatingLight that gets throughLight blocked
OD 11/1090%
OD 21/10099%
OD 31/1,00099.9%
OD 41/10,00099.99%

Read the table the way a physicist does: OD is not a comfort shade. It is the difference between the beam's full power at the eye and a ten-thousandth of it. The required OD for a device follows from that device's output — which is why eyewear is specified per device, not per room and never by color or darkness. Dark lenses prove nothing; a sunglass lens is dark because it dims visible light across the board, and it may pass our invisible wavelengths almost untouched.

The matching rule, stated once and completely:

  • The eyewear's printed range must include the wavelength in use — eyewear rated for 755 nm alexandrite work is not thereby protection for a 1,064 nm Nd:YAG.
  • Its OD must meet or exceed the rating the device requires.
  • One device fires in the room at a time (Lesson 2's controlled area), so one wavelength is in use at a time — and on a multi-device day, the eyewear is staged with the device, checked at start-up like every other part of the system.

Texas states the duty to wear it in so many words:

What is not eyewear, ever: sunglasses · prescription glasses · contact lenses · the client's squeezed-shut eyes · another device's pair borrowed on faith. If the correct eyewear for the wavelength in use is not in the room, the appointment does not start — Lesson 4 placed that sentence in the protocol, and this lesson is its reason.

Match the eyewear

Alexandrite 755The eyewear's printed range must include the wavelength in use — 755 nm is inside 700–850 nm.
Diode 810The eyewear's printed range must include the wavelength in use — 810 nm is inside 700–850 nm.
Nd:YAG 1,064Eyewear rated for 755 nm alexandrite work is not thereby protection for a 1,064 nm Nd:YAG. The eyewear's printed range must include the wavelength in use, and its OD must meet or exceed the rating the device requires.
IPL broad bandThe IPL card pairs only with the broadband rating.
Diode 810, second roomThe eyewear's printed range must include the wavelength in use — 810 nm is inside 700–850 nm. Eyewear is staged with the device, checked at start-up like every other part of the system.

Ordinary sunglasses: Sunglasses fail every pairing. Dark lenses prove nothing; a sunglass lens is dark because it dims visible light across the board, and it may pass our invisible wavelengths almost untouched. What is not eyewear, ever: sunglasses.

Eyes closed, it's just the legs: “Eyes closed” fails every pairing. What is not eyewear, ever: the client's squeezed-shut eyes. For IPL work, “she kept her eyes closed” is not a protection plan for it either.

---

Protecting the client's eyes — shields, and who places them

The operator wears eyewear. The client's protection has two forms, because the client's eyes are inside the treatment field's neighborhood in a way the operator's never are.

External eye shields are the standard for the great majority of treatments: opaque shields or blocked-out goggles designed for laser work that sit over the closed eyes and block the beam outright. Requirements are simple and absolute: they must be laser-rated or fully opaque to the wavelengths in use, they must fit so no gap admits a stray beam at the edge, and they go on before the device leaves standby and come off only after it returns there. For IPL work, the client's protection is likewise a rated, fully blocking shield or broadband-rated eyewear — the flash is broad-band visible and intense, and "she kept her eyes closed" is not a protection plan for it either.

Corneal (internal) shields are the second form: smooth, contact-lens-like metal shields that sit on the surface of the eye itself, under the eyelid. They exist for work immediately around the eyes, where an external shield's edge would block the treatment area. Two sentences govern them, and both are limits, not instructions:

  • They are placed only by a person trained and authorized to place them, working under the facility's protocols and its consulting-physician structure — placement involves anesthetic eye drops, lubrication, and a screened client (eye history matters), and it is a clinical act, not an accessory step.
  • This refresher teaches what they are and who may place them. It does not train or authorize anyone to place one. If your facility's protocols do not cover corneal shields and your training does not include them, the answer for periocular work is that your facility does not do that work in that way.

Between those two forms, most facilities draw their periocular line conservatively — many treat nothing inside the orbital rim at all. That is a facility-protocol decision, stated here as common practice: the closer the work comes to the eye, the more the protection — and the authorization behind it — has to rise to meet it.

---

Eyewear care, and the discipline of the room

Eyewear is a device. Lesson 2's logic applies to it whole: inspected before use, retired when damaged, and never trusted past its condition.

Inspection, at start-up, alongside the device checks:

  • Scratches, crazing, or cracks in a lens — that pair is retired. You cannot see optical density fade, so visible damage is the only warning you get; a lens that has been compromised may pass light it was rated to stop.
  • Frames and fit — a bent frame that gaps at the temple leaves an unprotected angle; laser light does not announce which angle it will arrive from.
  • Markings — the wavelength range and OD must be legible. A pair whose rating can no longer be read is a pair whose protection can no longer be verified, and it is retired on the same logic.

Care and storage: clean lenses only by the manufacturer's method (many laser lenses are coated and are ruined by the wrong solvent), store pairs in their cases, never loose in a drawer where the next item dropped in scratches them, and keep enough pairs in the room for everyone who can be in it — operator, client, and any third person §118.70(m) names. A missing pair discovered at start-up is a scheduling problem for that hour, and the appointment waits for eyewear; it does not borrow from another wavelength's drawer (that is Section 9's matching rule, applied to a busy day).

One more route to the eye: reflections. The beam you plan for travels from the aperture to the skin. A beam that meets a smooth, polished surface on the way — a mirror-finish instrument, a watch face, reflective jewelry (Lesson 2's checklist takes it off or covers it) — can be redirected with most of its power intact, in a direction nobody aimed. Dull, matte surfaces scatter light harmlessly in comparison; it is the mirror-like, specular reflection that carries a hazardous beam across a room. This is why the controlled area is audited for reflective surfaces at start-up, and why the beam is treated as live in every direction until the device is back on standby.

The room discipline that closes the lesson — the habits that make Sections 8–10 real:

  • Eyewear on before the device leaves standby; off only after it returns there.
  • Never look into the handpiece aperture, and never sight along the beam path — with or without eyewear, the aperture is not a thing you inspect with your eye.
  • Beam awareness: the device fires only at the treatment area, aimed and placed before the footswitch or trigger is live — the beam discipline of Lesson 2, stated here in its eye-protection form.

---

Key points

  • A burn is a chain, not an accident — fluence beyond the surface's budget, the wrong wavelength for the skin, stacked heat, a fouled window, or cooling that wasn't there. Every cause was named in an earlier lesson.
  • Read a burn by depth: superficial (red, warm, painful — or, on deep skin, darkened and warm), partial-thickness (blisters, moist, very painful), deep (pale, waxy, leathery — and suspiciously quiet). Redness is the least reliable sign in the room.
  • The first five minutes: stop · cool with cool water 10–20 minutes — never ice · remove what constricts · cover loosely with a non-stick dressing · assess (depth, size by the client's palm, location) · notify · document.
  • Never: ice, creams or home remedies, broken blisters, adhesive on the burn, finishing the area, or promises about how it will heal.
  • Refer the same day for blistering beyond a spot, size beyond the palm, deep-burn signs, high-stakes locations, fragile clients — or your own honest doubt.
  • The eye concentrates light onto the retina, our wavelengths (755–1,064 nm) are retinal wavelengths, and the beam is invisible — no blink defends against it and the injury can be painless and permanent.
  • Eyewear is matched, not dark: the printed wavelength range must include the device in use, at the required OD — and under §118.70(m), everyone in the room wears it, client included.

---

Next lesson: Lesson 6 — Emergencies, CPR & Post-Treatment Care: the burn's next 48 hours, the red flags that bring a client back, fainting and eye-exposure incidents, and the aftercare sheet every client leaves with.

🎧 Burns & Eye Protection — audio version
Press play to listen to this lesson.
Audio is generated on your device — no downloads needed. Listening counts the same as reading toward your lesson time.

Watch & Listen — the full lesson

Press play and the narration runs with an animated visual track that follows the lesson from the first minute to the last — watch and listen together. Pause any time, or tap the gold bar to jump; the pictures always match the voice.

Loading the visual track…

0:00

The Read tab carries this same lesson in full — the moving pictures follow the narration; they never replace the text.

CLIP IN PRODUCTION
▶

The first five minutes

The response played as one calm walk-through: the pulse stops, the handpiece goes down, water runs cool over the rectangle, a dressing is laid loosely on, and the practitioner's hands move to the chart. The narration reads the seven steps as a numbered spoken sequence, at aftercare pace.

This treatment clip is being produced and will appear here when published. The narration and the Read text cover the same material in full — listening or reading counts toward your lesson time exactly the same.

Watching counts the same as reading or listening toward your lesson time.

Lesson materials

No downloadable materials for this lesson yet — handouts will appear here when published.