Sanitation in Practice
In this lesson
- Proper disinfection of tools and implements
- Single-use items and when to discard
- Workstation setup and cleanup routines
Learning objectives
- Perform the proper disinfection of tools and implements step by step, in the correct order.
- Distinguish single-use items from multi-use items and discard single-use items correctly every time.
- Set up a workstation before the day begins, clean it thoroughly between clients, and close it down properly at night.
The one rule that runs everything
In the last lesson we covered the why. Now we get our hands dirty — or rather, we learn how to keep them clean. Everything in this lesson runs on one rule: clean first, then disinfect, then store properly. That order never changes. If you remember nothing else from this lesson, remember that order.
Why does the order matter so much? Because disinfectants are powerful but they are not magic. TDLR's rules say it plainly: disinfectants become inactivated and ineffective when visibly contaminated with debris, hair, dirt, and other particles. In plain English — a dirty tool in disinfectant is not being disinfected. The germs hide under the hair, the skin flakes, the product residue, and the chemical never reaches them. So every proper disinfection routine has a cleaning step first. Every time.
Disinfecting tools and implements: the step-by-step workflow
Let us walk through exactly what to do with a multi-use implement — say, your shears, combs, or nippers — after each client.
Step 1: Remove all visible debris. Wipe or rinse the implement so no hair, skin, or product remains. Use a brush or running water. Get into the hinges and teeth where debris hides.
Step 2: Wash with soap and water. Clean the implement thoroughly with soap or detergent and water. This is the cleaning step — it removes the soil so the disinfectant can do its job.
Step 3: Immerse in disinfectant. Place the implement fully into your disinfectant solution. The solution must be an EPA-registered bactericidal, fungicidal, and virucidal disinfectant, mixed and used exactly according to the manufacturer's instructions. Every product has a required contact time — the number of minutes the tool must stay submerged to be properly disinfected. Follow it. Do not rush it because your next client is waiting.
Step 4: Prepare your solution fresh daily. Disinfectants in which implements are immersed must be prepared fresh every day, or more often if the solution becomes diluted or soiled. If the liquid looks cloudy or dirty, change it — even if it is only noon. A good habit: mix fresh solution at the start of every day and label the container with today's date.
Step 5: Dry and store in a clean place. After the required contact time, remove the implement, dry it, and store it in a clean, dry, debris-free environment — a closed drawer, a clean case, or hung from hooks. Never toss a freshly disinfected comb onto a counter where dirty tools are sitting.
A note about chlorine bleach, because it is a common and inexpensive disinfectant. TDLR rules say bleach solution must be mixed daily, kept in a closed, covered container, and not exposed to sunlight. Bleach is harsh on sharp edges — the department does not recommend leaving scissors and other sharp objects in bleach solution beyond two minutes for effective disinfection. And never store bleach solution near other chemicals like acrylic monomers or alcohol, or near flame. Bleach vapors can react with vapors from other products.
Single-use items: use once, then throw away
Single-use items are anything porous — made of cloth, wood, or other absorbent materials with rough surfaces. The list is long: cotton balls and pads, neck strips, orangewood sticks, wooden spatulas, emery boards, paper towels, tissues, thread, and gauze. The rule is simple and absolute: one client, then discard.
Here is why this matters so much. Porous materials have tiny spaces inside them where germs can hide and survive. No amount of wiping or spraying makes a porous item safe for a second client. You cannot see the germs, which is exactly why the rule does not care whether the item "looks clean." It is single-use by design.
A few practical habits that keep you compliant:
- Never double-dip. When you need cream, lotion, or wax from a jar, use a single-use disposable spatula or applicator to remove product — never your finger, and never the same spatula twice. TDLR rules specifically require using a single-use disposable implement to remove creams and lotions from their containers.
- Neck strips every time. Protect each client's neck from contact with capes and coverings by using a fresh sanitary neck strip or a clean towel for every client.
- Stock up generously. The only reason anyone reuses a single-use item is running out. Keep your supply closet full. Single-use items are one of the cheapest things in your salon, and reusing them is one of the most expensive mistakes you can make.
- Discard immediately. Do not set used cotton or neck strips on your station "for now." They go straight into the trash after the service. This also keeps your station looking professional.
Your workstation routine: morning, between clients, and end of day
Sanitation is not something you do when you remember. It is a routine, the same way every time. Here is a routine that works in a real, busy Texas salon.
Morning setup
Before your first client: wash your hands. Mix fresh disinfectant solution if you use immersion jars, and check that all containers are labeled. Lay out clean, disinfected implements for the day. Make sure your single-use supplies are stocked — cotton, neck strips, applicators, towels. Check that your trash containers have liners and that your dirty-implement container is empty and ready. Wipe down your chair, counter, and any surfaces with disinfectant. When you do this every morning, you start the day in control.
Between every client
After each client, before the next one sits down: dispose of all single-use items used during the service. Place soiled multi-use implements in your dirty container — never back with the clean ones. Wipe down the chair, armrests, headrest, counter, and any surface the client touched, with disinfectant. If you used a shampoo bowl, clean and disinfect it. Wash your hands. Then set out fresh implements for the next client. This whole sequence takes only a few minutes once it is habit, and it is the single most important routine in your day.
End of day
At closing: disinfect all implements used during the day that have not yet been processed. Change your immersion solution — never leave tomorrow's tools sitting in today's solution overnight and call it good. Empty all trash, including the small trash at your station. Wipe down all surfaces, chairs, and shampoo bowls. Launder soiled towels and capes — never leave them piled up overnight. Restock your single-use supplies so tomorrow morning starts easy. A clean close means a calm open.
The clean and dirty system
Here is a simple system that prevents the most common storage violation: cross-contamination between clean and dirty implements. Set up two clearly separate, labeled containers at your station — one marked clean, one marked dirty. Dirty implements go in the dirty container immediately after use. They stay there until they have been through the full clean-then-disinfect workflow. Only then do they go in the clean container.
Never let the two mix. During a rush, it is tempting to set a used comb "just for a second" near the clean tools. Do not. That second is how cross-contamination happens. If you ever are not sure whether an implement is clean, treat it as dirty and reprocess it. That one habit will save you from ever using a contaminated tool on a client.
Recap
Proper disinfection follows an unchanging order: remove debris, wash with soap and water, immerse in an EPA-registered disinfectant (or properly mixed bleach) for the manufacturer's required contact time, and store in a clean, dry, debris-free place. Immersion solutions must be mixed fresh daily and changed sooner if they become soiled. Porous single-use items — cotton, neck strips, wooden spatulas, emery boards — are used once per client and discarded immediately, and creams and lotions are always removed from jars with a disposable applicator. Your workstation routine runs in three acts: morning setup, a full clean-down between every client, and a thorough end-of-day close, with clean and dirty implements kept strictly separate. In the next lesson, we turn to a topic TDLR now requires of every renewing licensee: human trafficking awareness.
Watch & Listen — the full lesson
Press play and the narration runs with an animated visual track that follows the lesson from the first minute to the last — watch and listen together. Pause any time, or tap the gold bar to jump; the pictures always match the voice.
The Read tab carries this same lesson in full — the moving pictures follow the narration; they never replace the text.
Lesson materials
No downloadable materials for this lesson yet — handouts will appear here when published.